### Purpose
Resend our indexes since we fixed that index-sending issue.
I made a new thing to only drop the non-local-device index IDs, i.e.,
those for other devices. This means we will see a mismatch and resend
all indexes, but they will not. This is somewhat cleaner as it avoids
resending everything twice when two devices are upgraded, and in any
case, we have no reason to force a resend of incoming indexes here.
### Testing
It happens on my computer...
The commit 7e4e65ebf5 added links to
devices listed in the Shared With list in the folder info. However, it
only added them to those that had no superscript next to them.
With this change, the links are added to all devices regardless of
whether they have the superscript next to their names or not. The commit
also simplifies the code by using anchors directly instead of wrapping
them in spans.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
### Purpose
Bountysource no longer exists and the readme link 404s. This removes the
Bountysource link and corresponding readme section.
Perhaps the section should instead be replaced by other instructions for
voting on features.
This is an extract from PR #9175, which can be reviewed in isolation to
reduce the volume of changes to review all at once in #9175. There are
about to be several services and API handlers that read and set cookies
and session state, so this abstraction will prove helpful.
In particular a motivating cause for this is that with the current
architecture in PR #9175, in `api.go` the [`webauthnService` needs to
access the
session](https://github.com/syncthing/syncthing/pull/9175/files#diff-e2e14f22d818b8e635572ef0ee7718dee875c365e07225d760a6faae8be7772dR309-R310)
for authentication purposes but needs to be instantiated before the
`configMuxBuilder` for config purposes, because the WebAuthn additions
to config management need to perform WebAuthn registration ceremonies,
but currently the session management is embedded in the
`basicAuthAndSessionMiddleware` which is [instantiated much
later](https://github.com/syncthing/syncthing/pull/9175/files#diff-e2e14f22d818b8e635572ef0ee7718dee875c365e07225d760a6faae8be7772dL371-R380)
and only if authentication is enabled in `guiCfg`. This refactorization
extracts the session management out from `basicAuthAndSessionMiddleware`
so that `basicAuthAndSessionMiddleware` and `webauthnService` can both
use the same shared session management service to perform session
management logic.
### Testing
This is a refactorization intended to not change any externally
observable behaviour, so existing tests (e.g., `api_auth_test.go`)
should cover this where appropriate. I have manually verified that:
- Appending `+ "foo"` to the cookie name in `createSession` causes
`TestHtmlFormLogin/invalid_URL_returns_403_before_auth_and_404_after_auth`
and `TestHtmlFormLogin/UTF-8_auth_works` to fail
- Inverting the return value of `hasValidSession` cases a whole bunch of
tests in `TestHTTPLogin` and `TestHtmlFormLogin` to fail
- (Fixed) Changing the cookie to `MaxAge: 1000` in `destroySession` does
NOT cause any tests to fail!
- Added tests `TestHtmlFormLogin/Logout_removes_the_session_cookie`,
`TestHTTPLogin/*/Logout_removes_the_session_cookie`,
`TestHtmlFormLogin/Session_cookie_is_invalid_after_logout` and
`TestHTTPLogin/200_path#01/Session_cookie_is_invalid_after_logout` to
cover this.
- Manually verified that these tests pass both before and after the
changes in this PR, and that changing the cookie to `MaxAge: 1000` or
not calling `m.tokens.Delete(cookie.Value)` in `destroySession` makes
the respective pair of tests fail.
This re-implements the stalled enhancement from #8808. Thanks @Craeckie
for the idea and first implementation draft!
If a folder is shared to a device with encryption, add a lock icon in
front of the device name under "Shared With" in the folder details
panel. Be careful not to add whitespace caused by line wraps in HTML
source code, which would defeat the purpose of keeping the icon glued to
the name by a non-breaking space.
Apply the same lock icon for the list of folders shared with a device.
This change was split off from #9355 as an independent clean-up / fix.
See that PR for review discussion, testing, and screenshots.
Improve the wrapping of folder labels / device names by going back to
word-wrapping, but making sure other spans, such as the trailing comma,
do not get separated from the label span.
* Avoid adding whitespace caused by line wraps in HTML source code.
The different cases within the ng-switch block are separated by
newlines for readability, but that gets parsed as whitespace. For
wrapping purposes, this should not happen, because then there is no
way to keep other HTML parts glued to the name / label in each list
entry.
* Simplify redundant conditional comma code.
The separating comma after a device name or folder label (all but the
last) should always stick to it. Use the HTML comment trick to avoid
whitespace and therefore a wrapping opportunity caused by the code
formatting newline. Thus the conditional comma only needs to be
defined once, not in each ng-switch case.
* Wrap at word boundaries and only break up words if necessary.
Use the overflow-wrap: break-word; style instead of word-break:
break-all;. While the latter is suitable for longish paths, breaking
device names or folder labels arbitrarily within words is ugly.
This also makes the the <sup> numbers actually stay glued to their
respective neighboring words.
Include legacy CSS alias "word-wrap" in the class definition.
* Fix indentation (unrelated).
Adds a bool flag to `scanIfItemChanged()` to indicate when the scan was initiated from a delete function, and if so, tell `IsEquivalentOptional()` to ignore Xattrs and Ownership regardless of the global setting.
I tested this with my sledgehammer and it seems to pass.
Go is not cgroup aware and by default will set GOMAXPROCS to the number
of available threads, regardless of whether it is within the allocated
quota. This behaviour causes high amount of CPU throttling and degraded
application performance.
Add support for setting umask value in the Docker `entrypoint.sh`
script. This is useful when
not syncing permissions and working with groups, and needing umask
values like `002` instead of `022`.
The changes to go.mod in latest Go 1.21/1.22 are not fully understood by
older Go that might be pre-installed on builds, so make sure we always
have a modern one in place even for running small release scripts etc.
Somewhere along the way, the non-parallel test became parallel, and at
that point, timeouts occurred. Parallel is better, so increase the
timeout on the offending call a bit...
The new test has a flakiness factor on slow platforms, where the close
on the sending connection races with the last index message, potentially
messing up the count. This adds a wait to ensure that all sent messages
are received, or the test will eventually fail with a timeout.
Currently `IsTraced("xyz")` will return true for
any inclusion of "xyz" in string.
This change splits `STTRACE` using `','`, `' '` and `';'`
as delimiters. That makes facilities separation
more clear.
This makes a couple of small improvements to the folder summary
mechanism:
- The folder summary includes the local and remote sequence numbers in
clear text, rather than some odd sum that I'm not sure what it was
intended to represent.
- The folder summary event is generated when appropriate, regardless of
whether there is an event listener. We did this before because
generating it was expensive, and we wanted to avoid doing it
unnecessarily. Nowadays, however, it's mostly just reading out
pre-calculated metadata, and anyway, it's nice if it shows up reliably
when running with -verbose.
The point of all this is to make it easier to use these events to judge
when devices are, in fact, in sync. As-is, if I'm looking at two
devices, it's very difficult to reliably determine if they are in sync
or not. The reason is that while we can ask device A if it thinks it's
in sync, we can't see if the answer is "yes" because it has processed
all changes from B, or if it just doesn't know about the changes from B
yet. With proper sequence numbers in the event we can compare the two
and determine the truth. This makes testing a lot easier.
This is a refactor of the protocol/model interface to take the actual
message as the parameter, instead of the broken-out fields:
```diff
type Model interface {
// An index was received from the peer device
- Index(conn Connection, folder string, files []FileInfo) error
+ Index(conn Connection, idx *Index) error
// An index update was received from the peer device
- IndexUpdate(conn Connection, folder string, files []FileInfo) error
+ IndexUpdate(conn Connection, idxUp *IndexUpdate) error
// A request was made by the peer device
- Request(conn Connection, folder, name string, blockNo, size int32, offset int64, hash []byte, weakHash uint32, fromTemporary bool) (RequestResponse, error)
+ Request(conn Connection, req *Request) (RequestResponse, error)
// A cluster configuration message was received
- ClusterConfig(conn Connection, config ClusterConfig) error
+ ClusterConfig(conn Connection, config *ClusterConfig) error
// The peer device closed the connection or an error occurred
Closed(conn Connection, err error)
// The peer device sent progress updates for the files it is currently downloading
- DownloadProgress(conn Connection, folder string, updates []FileDownloadProgressUpdate) error
+ DownloadProgress(conn Connection, p *DownloadProgress) error
}
```
(and changing the `ClusterConfig` to `*ClusterConfig` for symmetry;
we'll be forced to use all pointers everywhere at some point anyway...)
The reason for this is that I have another thing cooking which is a
small troubleshooting change to check index consistency during transfer.
This required adding a field or two to the index/indexupdate messages,
and plumbing the extra parameters in umpteen changes is almost as big a
diff as this is. I figured let's do it once and avoid having to do that
in the future again...
The rest of the diff falls out of the change above, much of it being in
test code where we run these methods manually...
