This adds the ability to have multiple concurrent connections to a single device. This is primarily useful when the network has multiple physical links for aggregated bandwidth. A single connection will never see a higher rate than a single link can give, but multiple connections are load-balanced over multiple links.
It is also incidentally useful for older multi-core CPUs, where bandwidth could be limited by the TLS performance of a single CPU core -- using multiple connections achieves concurrency in the required crypto calculations...
Co-authored-by: Simon Frei <freisim93@gmail.com>
Co-authored-by: tomasz1986 <twilczynski@naver.com>
Co-authored-by: bt90 <btom1990@googlemail.com>
Currently, some of the information for folders and devices displayed in
the GUI relies on arbitrary values that come pre-set as defaults on a
fresh Syncthing installation, i.e. if the value matches the default, it
is hidden, and if does not, then it is displayed.
With this change, the GUI always displays all information regardless
of their value, making the overall experience more consistent and
predictable.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Currently, different icons are used for File Versioning when displayed
in the unfolded folder info in the main part of the GUI, and the icon
used in the Edit Folder modal. This changes the main GUI icon to match
the icon used in the modal.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
The Logs icon was changed in [1] in the header, however the icon used in
the modal was left out. This changes it, so that the header and the
modal icons match.
[1] 2abba1dfb0
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
* gui: Remove footer and move links to header (fixes#5607)
Currently, the footer is always present and takes space at the bottom of
the GUI. However, the links listed there are not part of everyday user
interaction, and as such, they unnecessarily clutter the page, reducing
the usable screen space. Thus, transform the current Help link in the
header into a Help dropdown menu, and move the links from the footer
into it.
Also apply the following tweaks:
1. Move the About dialog from Actions to Help.
2. Add an Introduction (to the GUI) link to Help.
3. Change the Support icon from a question mark to a group of people.
4. Change the Changelog and About icons to a filled version to match the
other icons better.
5. Use a source code icon for Source Code instead of a wrench icon, and
move the wrench icon to Logs. This is done to prevent Changelog and
Logs from using the same icon.
6. Update all dropdown icons' Fork Awesome styles to "fa fa-fw <icon>".
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
* a few more Fork Awesome style updates
---------
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
The CSS method to select device IDs on click was added in [1]. However,
it was later mistakenly overwritten by [2]. This commit fixes the
regression and also applies the same behaviour to the Edit Device modal
which was omitted in the original commit.
[1] 5baf5fedb5
[2] 5e384c9185
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Currently, the versions filter is case-sensitive regardless of the
underlying OS. With this change, the filter becomes case-insensitive
everywhere, which is more user-friendly and makes it easier to search
for files whose exact case the user may not remember.
In addition, forward and backslashes are no longer distinguished,
whether used as path separators or as part of a file / directory
name (which is unlikely but possible on some platforms).
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
As per Bootstrap recommendation, buttons with tooltips inside button
groups require to have container: 'body' set. This prevents tooltips
from causing the buttons to jump on hover and also allows the tooltips
to be wider instead of wrapping on every space.
Ref: https://getbootstrap.com/docs/3.3/components/#btn-groups
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
This adds an environment variable STVERSIONEXTRA that, when set, gets
added to the version information in the API and GUI.
The purpose of all this is to be able to communicate something about the
bundling or packaging, through the log & GUI and the end user, to the
potential person supporting it -- i.e., us. :) A wrapper can set this
variable to indicate that Syncthing is being run via `SyncTrayzor`,
`Syncthing-macOS`, etc., and thus indicate to the end user that the GUI
they are looking at is perhaps not the only source of truth and
management for this instance.
This removes the tilde expansion we had in the GUI. I'm not sure why we
had it, but there are valid reasons to have a folder path with tilde in
it in the config, and it was previously impossible to enter one of
those.
This prevents combining untrusted with introducer and auto-accept, and
also verifies that folders shared with untrusted devices have passwords
at config loading time.
Co-authored-by: Simon Frei <freisim93@gmail.com>
This makes the various protocol priorities configurable among the other
options. With this, it's possible to prefer QUIC over TCP for WAN
connections, for example. Both sides need to be similarly configured for
this to work properly.
The default priority order remains the same as previously (TCP, QUIC,
Relay, with LAN better than WAN).
To make this happen I made each dialer & listener more priority aware,
and moved the check for whether a connection is LAN or not into the
dialer / listener -- this is the new "lanChecker" type that's passed
around.
* gui: Import latest state from Weblate.
Downloaded 2023-03-23 at 20:38:53.
* gui: Remove untranslated strings from JSON files.
The GUI code will fall back to the English string translation anyway,
so keeping it identical inside the other language files does not
help. It makes the filter handling on Weblate easier though.
Current state retreived with these filter settings:
state:>=translated OR (state:needs-editing AND NOT check:same)
Currently, the name and date filters in the Restore Versions modal are
always enabled, even if there are no versioned files present. With this
change, they are enabled only when there are no errors and versioned
files actually exist.
In addition to disabling the filters, also completely skip date picker
generation, as it serves no function while still displaying a non-sense
date range, which starts today and ends in the past.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
The reference comes from fd0a6225aa,
but the file itself was removed in the process of working on the pull
request, yet the reference to it was still left in the index.html.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
gui: Remove duplicate Spanish (Spain) translation.
Currently not among the set of "valid" (sufficiently complete)
languages and no longer synced with the tranlation platform, Weblate.
* Normalize EOL before EOF.
* Import current Transifex state, only translated.
Skip duplicated and completely empty languages.
* Re-add untranslated strings to JSON files.
These are now treated correctly as untranslated, but present with the
original (English) translation key.
* Update valid language codes and names.
* Refer to Weblate instead of Transifex for translations.
* lang-es: Copy untranslated strings from es-ES.
* Integrate translation changes from Weblate.
Translated using Weblate (Polish)
Currently translated at 100.0% (512 of 512 strings)
Translation: Syncthing/GUI strings
Translate-URL: https://hosted.weblate.org/projects/syncthing/gui/pl/
Translated using Weblate (Danish)
Currently translated at 98.6% (505 of 512 strings)
Translation: Syncthing/GUI strings
Translate-URL: https://hosted.weblate.org/projects/syncthing/gui/da/
Translated using Weblate (Lithuanian)
Currently translated at 85.4% (441 of 516 strings)
Translation: Syncthing/GUI strings
Translate-URL: https://hosted.weblate.org/projects/syncthing/gui/lt/
Translated using Weblate (French)
Currently translated at 100.0% (516 of 516 strings)
Translation: Syncthing/GUI strings
Translate-URL: https://hosted.weblate.org/projects/syncthing/gui/fr/
Translated using Weblate (Danish)
Currently translated at 98.6% (509 of 516 strings)
Translation: Syncthing/GUI strings
Translate-URL: https://hosted.weblate.org/projects/syncthing/gui/da/
Translated using Weblate (Spanish)
Currently translated at 100.0% (516 of 516 strings)
Translation: Syncthing/GUI strings
Translate-URL: https://hosted.weblate.org/projects/syncthing/gui/es/
* translation update uses weblate
---------
Co-authored-by: Jakob Borg <jakob@kastelo.net>
Currently, action and type are both displayed only in English. This
commit makes it possible to translate both of them.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
The current code assumes that lastSeenDays is always set which is not
the case when device reports its lastSeen as equal to the Unix epoch.
Thus, make sure that lastSeenDays is set before proceeding with the
disconnected-inactive status check to avoid JS errors in the browser.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
This adds a word to the version string when running containerized. The
purpose is mostly to facilitate troubleshooting via screenshot by
"leaking" this rather important aspect of the setup. Additionally, the
version row gets "no-overflow-ellipsis" treatment so that the whole
thing is actually visible in the GUI and the (now useless) tooltip is
removed. In production releases this won't make a difference as the
whole thing will typically fit, but in odd setups it provides more info
up front.
The authorship script didn't pick up people who were only ever
"co-authors" of a commit, such as when they wrote stuff which was later
included in a PR by someone else, or added code during code review.
This modified the script to look closer in the commit bodies for
"Co-authored-by:"-lines and adds those found to the set of authors.
gui: Remove unmaintained language variant nl-BE.
This has long been removed from Transifex and from the valid-langs.js
list, but somehow the translation file stayed in the repo. There is
already a generic Dutch variant (nl) available as replacement.
* lib/connections: Cache isLAN decision for later external access.
The check whether a remote device's address is on a local network
currently happens when handling the Hello message, to configure the
limiters. Save the result to the ConnectionInfo and pass it out as
part of the model's ConnectionInfo struct in ConnectionStats().
* gui: Use provided connection attribute to distinguish LAN / WAN.
Replace the dumb IP address check which didn't catch common cases and
actually could contradict what the backend decided. That could have
been confusing if the GUI says WAN, but the limiter is not actually
applied because the backend thinks it's a LAN.
Add strings for QUIC and relay connections to also differentiate
between LAN and WAN.
* gui: Redefine reception level icons for all connection types.
Move the mapping to the JS code, as it is much easier to handle
multiple switch cases by fall-through there.
QUIC is regarded no less than TCP anymore. LAN and WAN make the
difference between levels 4 / 3 and 2 / 1:
{TCP,QUIC} LAN --> {TCP,QUIC} WAN --> Relay LAN --> Relay WAN -->
Disconnected.
gui: Add copy to clipboard, share by email, and share by SMS buttons to device IDs (fixes#2771, ref #3868)
Add buttons to allow for simpler sharing device IDs with others. The
first one copies the ID to clipboard (trying to use three different
methods, depending on the browser). The second one triggers a mailto
link with prefilled subject and body. The third one triggers an sms link
with prefilled body. The short description of Syncthing included in the
latter part of the body is a direct copy from the description at the
official website https://syncthing.net.
Issue #3868 is referred here, because the copy to clipboard button
offers an alternative method for IE11 users to actually be able to copy
device IDs without having to select it manually (which doesn't work).
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
The connection type icon comes from Bootstrap. As such, it does not
follow the same dimensions as the other GUI icons, which come from Fork
Awesome. Thus, add left and right margin to make its width roughly the
same as the other GUI icons, which fixes its alignment in relation to
text.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Currently, a disconnected device is marked as "Disconnected" without any
consideration whether the state is just temporary or rather it has been
like that for a long time, potentially requiring user intervention.
This commit adds a new state called "Disconnected (Inactive)" which is
shown for devices that have been disconnected for longer than a week. It
also changes the "Last seen" information, so that "Never" is used only
when the device hasn't connected at all, and the exact date is displayed
otherwise.
Additionally, when the date is older than 1 week, a note about that is
displayed below the date. Furthermore, when the date becomes older than
1 month, the note text colour changes to orange, and when it exceeds 1
year, the colour changes again to red. This is done to provide the user
with a visual clue that something may potentially be wrong and requires
a manual fix.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Co-authored-by: André Colomb <src@andre.colomb.de>
Right now, the Out of Sync Items list for a specific remote device is
available only when the device is online and currently synchronising.
However, the list itself is being created by Syncthing all the time, so
there is no need to hide it from the user even when the remote device is
offline or paused. This way they can always easily check which files
exactly have not been synchronised yet.
In addition, the Out of Sync Items entry already includes file size next
to it, so there is no need to display it again next to the Sync Status
entry. Thus, remove out-of-sync file size from Sync Status, leaving only
percentage next to it.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
In large setups, it is currently impossible to know the exact number of
folders and remote devices without counting them manually, either in the
GUI or in config.xml. Thus, to provide this information to the user, add
a specific number right next to both Folders and Remote Devices headers
in the Web GUI. The numbers are only displayed when two or more folders
or devices are present.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Some WebKit browsers select more than needed when using double click to
select device IDs, e.g. new lines and white space. This commit adds a
prefixed version of user-select in CSS in order to add support for those
browsers and allow them to select just device IDs automatically.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
