"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.":"另外，完全重新扫描的间隔将增加（乘以 60，例如默认值将变为 1 小时）。您也可以在选择“否”后手动配置每个文件夹。",
"All folders shared with this device must be protected by a password, such that all sent data is unreadable without the given password.":"与此设备共享的所有文件夹都必须有密码保护，这样所有发送的数据在没有密码的情况下是不可读的。",
"An external command handles the versioning. It has to remove the file from the shared folder. If the path to the application contains spaces, it should be quoted.":"外部命令处理版本控制。必须从共享文件夹中移除文件。如果应用程序的路径包含空格，应用半角引号括起来。",
"Connections via relays might be rate limited by the relay":"通过中继的连接可能受中继的速率限制",
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.":"现在，Syncthing 中提供了持续监视更改的功能。这将检测磁盘上的更改，并仅对修改后的路径进行扫描。好处是更改传播得更快，所需的完全扫描更少。",
"Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:":"已禁用定期扫描但设置更改监视失败，每分钟重试一次：",
"Disables comparing and syncing file permissions. Useful on systems with nonexistent or custom permissions (e.g. FAT, exFAT, Synology, Android).":"禁用比较和同步文件权限。 适用于不存在或自定义权限的系统（例如 FAT、exFAT、Synology、Android）。",
"Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.":"启用发送扩展属性至其他设备，并应用传入的扩展属性。可能需要以更高的权限运行。",
"Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.":"启用发送扩展属性至其他设备，但不应用传入的扩展属性。这可能会对性能产生重大影响。启用“同步扩展属性”时始终启用。",
"Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.":"启用发送所有权信息至其他设备，并应用传入的所有权信息。通常需要以更高的权限运行。",
"Enables sending ownership information to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.":"启用发送所有权信息至其他设备，但不应用传入的所有权信息。这可能会对性能产生重大影响。启用“同步所有权”时始终启用。",
"Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.":"输入一个非负数（例如“2.35”）并选择单位。% 表示占磁盘总容量的百分比。",
"Enter a non-privileged port number (1024 - 65535).":"输入非特权端口号（1024 - 65535）。",
"Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.":"输入以半角逗号分隔的（\"tcp://ip:port\", \"tcp://host:port\"）设备地址，或者输入“dynamic”以自动发现设备地址。",
"Files are moved to .stversions directory when replaced or deleted by Syncthing.":"当 Syncthing 替换或删除文件时，文件将移动到 .stversions 目录。",
"Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.":"当 Syncthing 替换或删除文件时，文件将移动到 .stversions 目录中，文件名带有日期戳版本。",
"Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.":"文件受到保护，不会在其他设备上进行更改，但在此设备上所做的更改将发送到集群的其他设备。",
"Files are synchronized from the cluster, but any changes made locally will not be sent to other devices.":"文件从集群同步，但本地所做的任何更改都不会发送到其他设备。",
"Folder type \"{%receiveEncrypted%}\" cannot be changed after adding the folder. You need to remove the folder, delete or decrypt the data on disk, and add the folder again.":"添加文件夹后，无法更改文件夹类型“{{receiveEncrypted}}”。您需要移除文件夹，删除或解密磁盘上的数据，然后重新添加文件夹。",
"For the following folders an error occurred while starting to watch for changes. It will be retried every minute, so the errors might go away soon. If they persist, try to fix the underlying issue and ask for help if you can't.":"对于以下文件夹，在开始监视更改时出错。它将每分钟重试一次，因此错误可能很快就会消失。如果它们持续存在，请尝试解决根本问题，如果不能，请寻求帮助。",
"Forever":"永远",
"Full Rescan Interval (s)":"完全重新扫描间隔（秒）",
"GUI":"GUI",
"GUI / API HTTPS Certificate":"GUI/API HTTPS 证书",
"GUI Authentication Password":"GUI 身份验证密码",
"GUI Authentication User":"GUI 身份验证用户",
"GUI Authentication: Set User and Password":"GUI 身份验证：设置用户和密码",
"However, your current settings indicate you might not want it enabled. We have disabled automatic crash reporting for you.":"我们已经为您禁用了自动发送崩溃报告，因为您当前的设置表明您可能并不想启用该选项。",
"Identification":"标识",
"If untrusted, enter encryption password":"如果不受信任，请输入加密密码",
"If you want to prevent other users on this computer from accessing Syncthing and through it your files, consider setting up authentication.":"如果要阻止此计算机上的其他用户访问 Syncthing 并通过它访问文件，请考虑设置身份验证。",
"Ignore patterns can only be added after the folder is created. If checked, an input field to enter ignore patterns will be presented after saving.":"只有在创建文件夹后才能添加忽略模式。勾选后，在保存后将显示用于设置忽略模式的输入框。",
"Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for":"本地计算机上文件夹的路径。如果不存在，会创建它。波浪线符号（~）可用作下列项目的缩略符",
"Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).":"历史版本储存路径（留空则会默认存储在共享文件夹中的 .stversions 目录）。",
"Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.":"候选版本包含最新功能和修复程序。它们类似于传统的每两周一次的 Syncthing 发布。",
"Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.":"在集群状态中显示该名称，而不是设备 ID。将作为可选的默认名称向其他设备通告。",
"Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.":"在集群状态中显示该名称，而不是设备 ID。如果留空，将更新为设备通告的名称。",
"Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.":"仅存储和同步加密数据。所有连接设备上的文件夹都需要使用相同的密码设置，或者也需要设置为“{{receiveEncrypted}}”类型。",
"Syncthing is Free and Open Source Software licensed as MPL v2.0.":"Syncthing 是自由开源软件，许可证为 MPL v2.0。",
"Syncthing is a continuous file synchronization program. It synchronizes files between two or more computers in real time, safely protected from prying eyes. Your data is your data alone and you deserve to choose where it is stored, whether it is shared with some third party, and how it's transmitted over the internet.":"Syncthing 是连续的文件同步程序。它在两台或多台计算机之间实时同步文件，安全地保护它们防止窥视。您的数据是私有的，您有权选择其存储位置、是否与第三方共享以及如何通过互联网传输。",
"Syncthing is listening on the following network addresses for connection attempts from other devices:":"Syncthing 正在以下网络地址监听来自其他设备的连接尝试：",
"Syncthing is not listening for connection attempts from other devices on any address. Only outgoing connections from this device may work.":"Syncthing 不监听任何地址上其他设备的连接尝试。只有来自此设备的传出连接才能工作。",
"Syncthing now supports automatically reporting crashes to the developers. This feature is enabled by default.":"Syncthing 现在支持自动向开发人员发送崩溃报告。默认情况下启用此功能。",
"Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…":"Syncthing 似乎已关闭，或者您的互联网连接有问题。正在重试…",
"Syncthing seems to be experiencing a problem processing your request. Please refresh the page or restart Syncthing if the problem persists.":"Syncthing 在处理您的请求时似乎遇到问题。如果问题仍然存在，请刷新页面或重启 Syncthing。",
"The GUI address is overridden by startup options. Changes here will not take effect while the override is in place.":"GUI 地址已被启动选项覆盖。当覆盖存在时，此处的更改就不会生效。",
"The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).":"在此处输入的设备 ID 可以在另一台设备的“操作 > 显示 ID”对话框中找到。空格和破折号是可选的（忽略）。",
"The encrypted usage report is sent daily. It is used to track common platforms, folder sizes, and app versions. If the reported data set is changed you will be prompted with this dialog again.":"加密的使用情况报告每天发送一次。它用于跟踪常见平台、文件夹大小和应用版本。如果报告的数据集发生更改，系统将再次弹出此对话框提示您。",
"The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.":"输入的设备 ID 似乎无效。设备 ID 包含字母和数字，长度为 52 或 56，空格和破折号是可选的。",
"The folder content on other devices will be overwritten to become identical with this device. Files not present here will be deleted on other devices.":"其他设备上的文件夹内容将会覆盖，与此设备完全相同。此处不存在的文件将在其他设备上删除。",
"The folder content on this device will be overwritten to become identical with other devices. Files newly added here will be deleted.":"此设备上的文件夹内容将会覆盖，与其他设备相同。此处新添加的文件将会删除。",
"The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.":"使用以下间隔：最近一小时内的历史版本，更新间隔小于三十秒的仅保留一份。最近一天内的历史版本，更新间隔小于一小时的仅保留一份。最近一个月内的历史版本，更新间隔小于一天的仅保留一份。距离现在超过一个月且小于最长保留时间的，更新间隔小于一周的仅保留一份。",
"The following items could not be synchronized.":"以下项目无法同步。",
"The following items were changed locally.":"以下项目已在本地更改。",
"The following methods are used to discover other devices on the network and announce this device to be found by others:":"以下方法用于发现网络上的其他设备，并通知其他人发现此设备：",
"The following text will automatically be inserted into a new message.":"以下文本将自动插入到新消息中。",
"The following unexpected items were found.":"发现以下意外项目。",
"This device cannot automatically discover other devices or announce its own address to be found by others. Only devices with statically configured addresses can connect.":"此设备无法自动发现其他设备，也无法向其他人宣布自己的地址。只有具有静态配置地址的设备才能连接。",
"This is a major version upgrade.":"这是一次重大版本升级。",
"This setting controls the free space required on the home (i.e., index database) disk.":"此设置控制主磁盘（即索引数据库）上所需的可用空间。",
"To connect with the Syncthing device named \"{%devicename%}\", add a new remote device on your end with this ID:":"要连接名为“{{devicename}}”的 Syncthing 设备，请在您的终端添加具有此 ID 的新远程设备：",
"To permit a rule, have the checkbox checked. To deny a rule, leave it unchecked.":"要允许某条规则，请选中复选框。要拒绝某条规则，请将其保留为未选中状态。",
"Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.":"超过最长保留时间，或者不满足下列条件的历史版本，则会自动删除。",
"Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".":"警告，此路径是现有文件夹“{{otherFolder}}”的上级目录。",
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).":"警告，此路径是现有文件夹“{{otherFolderLabel}}”（{{otherFolder}}）的上级目录。",
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".":"警告，此路径是现有文件夹“{{otherFolder}}”的下级目录。",
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).":"警告，此路径是现有文件夹“{{otherFolderLabel}}”（{{otherFolder}}）的下级目录。",
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.":"警告：如果您使用的是 {{syncthingInotify}} 等外部监视程序，则应确保其已停用。",
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.":"添加新文件夹时，请记住文件夹 ID 用于在不同设备之间建立联系。它们区分大小写，必须在所有设备之间完全匹配。",
"When set to more than one on both devices, Syncthing will attempt to establish multiple concurrent connections. If the values differ, the highest will be used. Set to zero to let Syncthing decide.":"当两台设备上的连接数均被设为大于 1 时，Syncthing 会尝试建立多个并行连接。如果两台设备上的设置的连接数不同，则会使用最大的连接数。设为 0 表示让 Syncthing 自行决定。",
